EN HE

Arctic Cooling Freezer 7 X for AMD Bulk

מק"ט:

ACFRE00088A

אחריות:

3 שנים

יצרן:

ARCTIC

קישור לאתר יצרן

Arctic Cooling Freezer 7 X for AMD is expected to release the AM5 socket, the successor to its popular AM4 platform, at the end of 2022. Since all mechanical dimensions remain identical, ARCTIC guarantees compatibility with our coolers on AMD's new processors.

הצעת מחיר

מפרט

מידע

מפרט

סוג קירור

קירור אוויר

סוג תאורה

ללא תאורה

תושבת מעבד

AM4

\ AM5

גובה (ממ)

140

מאוורר מובנה (ממ)

100

מידע

FUTURE-PROOF COMPATIBILITY AMD is expected to release the AM5 socket, the successor to its popular AM4 platform, at the end of 2022. Since all mechanical dimensions remain identical, ARCTIC guarantees compatibility with our coolers on AMD's new processors. In addition, all coolers shipped by ARCTIC are already compatible with Intel's Alder Lake LGA1700 processors. Coolers purchased from resellers may have been shipped without the corresponding accessories. In this case, please contact ARCTIC customer support.
	A WORTHY FREEZER 7 PRO SUCCESSOR: BETTER PRICE - BETTER PERFORMANCE The ARCTIC Freezer 7 X is a compact CPU cooler with one 100 mm fan. It is multi-compatible with common AMD® sockets. It benefits from an improved heatsink design and a reworked heat pipe layout. In conjunction with the fan, which is optimised for high static pressure, ARCTIC has been able to significantly improve the cooling performance of Freezer 7 X.
COMPATIBLE WITH AMD® SOCKETS The Freezer 7 X is compatible with all current desktop sockets from AMD®. By using the mounting frame, simple installation is possible without a need to remove the mainboard.
	PRE-APPLIED MX-4 THERMAL PASTE Pre-applied, high-performing MX-4 thermal paste ensures quick and clean assembly.
LONGER LIFESPAN THANKS TO ITS LOW COIL TEMPERATURE The Freezer 7 X uses a fan motor newly developed by ARCTIC. This runs less audibly and more efficiently, so that the temperature of the coils is 20 °C lower than with conventional motors. This increases the lifespan of the fans considerably, allowing ARCTIC to grant a 6-year warranty period for the Freezer 7 X.
	OFFSET HEAT PIPES ENABLE OPTIMAL HEAT DISSIPATION The direct touch heat pipes attached to the Freezer 7 X and an optimised design of the 44 cooling fins together ensure that the heat from the CPU can be ideally removed and released into the air.
MORE EFFICIENT AND WHISPER QUIET In addition to operating more quietly, even at maximum speed, the Freezer 7 X built-in fan motor is also much more efficient. The power consumption was reduced from 0.25 A to 0.07 A, which corresponds to an effective savings of 72 % in power consumption. ARCTIC engineers were also able to reduce the volume by 40 %, allowing the Freezer 7 X to run at a whisper-quiet 0.3 sone when at maximum speed.
	10 % MORE COOLING CAPACITY WITH FREEZER 7 X The ARCTIC Freezer 7 X sets new standards in cooling. Compared to its predecessor, a performance increase of almost 10 % could be tested. The thermal resistance stands for the absolute performance of a CPU cooler by indicating the temperature increase per unit of performance. It also represents the cooling performance independent of the processor and is the more accurate alternative to a TDP specification.
DIRECT TOUCH HEAT PIPES The Freezer 7 X uses direct touch heatpipes. This ensures that the heat to be dissipated is transferred directly to the heatpipes without an additional material layer, and transported into the heatsink via the pipes.

השוואה להסיר את כל

השוואה